DuPont™ Cyrel DSP ( 1,14 | 1,7 )

At your request we will make photopolymer plates (flexo) on the DuPont™ Cyrel DSP ( 1,14 | 1,7 ) - the material is always available in the Moscow, Yekaterinburg, Novosibirsk, Nizhny Novgorod and Kiev

DuPont™ Cyrel® Functional plate DSP - This digital plate for those segments that require the highest optical density and wide gradation range in all segments of the packaging industry. Plates DSP designed to work with a wide variety of substrates and inks.

Areas of use

• Flexible packaging
• Labels Envelopes
• Packets and bags
• Folding cartons
• Pre sealant liner ("preprint")
• Packaging for beverages

product Features

• Exceptional ink transfer ensures smooth boards with high-density, highest quality to the light when it is stored. The result is outstanding contrast and wide dynamic range
• A wide range of gradation, and high optical density of the plates make the plate Cyrel® DSP universal for different segments of the packaging industry
• Clean and stability during long print runs. The relief image is clean and clear
• Less time of preparation of the printing machine, fast access to color
• Low dot gain
• High resistance to ozone and white light ensures the safety of the plate for a long time

Compatible with printing inks and solvents

Cyrel® DSP provides excellent compatibility with solvent based inks, water-based and UV-inks.

Description of the manufacturing process

Expose the plate through the back to create a "cap" and maximize sensitivity. Back exposure varies according to relief required. Remove the protective sheet and record the image with the Cyrel Digital Imager (CDI). Spend the main exhibition. Process the plate in the Cyrel solvent processor to remove unexposed polymer. Spend finisher to remove residual surface tackiness.

Mounting form

To install the recommended forms of Cyrel DSP device mounting photopolymer plates Cyrel Microflex. Double-sided adhesive tape should be applied to the printing cylinder or sleeve in a form for easier and precise assembly. The polyester base will maintain accurate register even for large forms.

Storage of raw materials

Unexposed plates should be stored in a cool place (4-32 ° C), away from direct heat sources. Humidity control is not required. Packages Cyrel * DSP there is foam interleaved to provide maximum protection of the plate during transportation and storage. Plates should be stored in a horizontal position. Plates should not be exposed to direct sunlight or bright white light. Avoid exposure to ozone.

Working with plates

Photopolymer plates Cyrel DSP should be handled under UV free light; fluorescent bulbs should be covered with a special film that protects from UV radiation.

Storage of printed forms

After printing, plates should be thoroughly cleaned with compatible solvent. They can be stored on cylinders, sleeves or demounted and stored flat.

Cyrel® DSP 45 Thickness 1.14 mm Cyrel® DSP 67 Thickness 1,70 mm
Stiffness 78-80 Shore A 70-72 Shore A
Reproduction gradations 1 - 98% 150 lines / cm 1 - 98% 150 lines / cm
The minimum line width 0,050 mm 0,050 mm
The minimum diameter of the point 0,15 mm 0,15 mm
The depth of relief 0,45 - 0,55 mm 0,45 - 0,55 mm

This technical information is provided free of charge and is based on data, which DuPont believes to be reliable. The information is intended for specialists and can be used at their discretion. The use of this information means that all those using it will satisfy themselves that their particular conditions of use present no health and safety. Since such conditions can not be controlled, DuPont does not give any guarantee and does not accept any liability regarding the use of this information. This information can not be used as a license or as a recommendation to infringe any patents.