nyloflex® FAC | nyloflex® FAC Digital

At your request we will make photopolymer plates (flexo) to Flint Group™ nylofl ex® FAC | nylofl ex® FAC Digital - the material is always available in the Moscow, Yekaterinburg, Novosibirsk, Nizhny Novgorod and Kiev

nyloflex® FAC | nyloflex® FAC Digital

Product Specifications

  • satisfies any requirement - from printing on uneven and rough materials, pressure-sensitive, as well as soft paper
  • is ideal for complex and multi-color designs
  • excellent ink transfer in combination with high hiding power and an optical density plates
  • is ideal for printing on corrugated board, reduces the effect of "washboard"
  • the simple process of making molds, thanks to the wide range of exposure and color change
  • a very good intermediate depths
  • due to special surface properties - the minimum number of cleanings
  • extremely durable and resistant material
    • high stability in the printing process
    • Minimum mechanical wear
    • high resistance to swelling of
    • high resistance to ozone
    • perfectly retains the properties during storage
Advantages nyloflex® Digital
  • Excellent print quality with sharper image quality, more open intermediate depths, a more precise study of dots in the highlights and minimal dot gain, ie, a wider range of tonal values and contrast enhanced
  • Improved performance and data transfer without loss of quality thanks to the digital process
  • consistent quality when reusing plates in the printing process
  • Cost-effective and environmentally friendly in the production process, since the film is not required
nyloflex® FAC | nyloflex FAC® Digital
Specifications
284 318 394 432 470 500 550 6001 635
The base material (substrate) polyester film
The color of the original plate dark blue-violet (nyloflex® FAC Digital with black LAMS layer)
The range of the plate thickness, mm
2.84 3.18 3.94 4.32 4.70 5.00 5.50 6.001 6.35
The range of the plate thickness, inch
0.112 0.125 0.155 0.170 0.185 0.197 0.217 0.2361 0.250
Hardness Shore A plate (DIN 53505)
32 32 32 32 32 32 32 32 32
The hardness of the formulations according to (Shore A)
39 37 35 33 32 31 31 31 30
The relief depth (mm)
0.9 – 1.2 0.9 – 1.5 1.0 – 1.5 1.2 – 2.0 1.2 – 2.2 1.8 – 2.8 2.0 – 3.0 2.2 – 3.0 2.2 – 3.0
Reproduction gradations (%)
2 – 95 2 – 95 3 – 95 3 – 95 3 – 95 3 – 95 3 – 95 3 – 95 3 – 95
Linearity (up to l / cm)
48 48 40 40 40 32 32 32 32
Reproduction positive lines (up to mm)
100 100 300 300 300 300 300 300 300
Diameter detached points (to microns)
200 200 750 750 750 750 750 750 750
processing Parameters2
exposure reverse nyloflex® FAC
50-150 50-200 50-200 50-200 80-200 80-200 80-200 80-200 80-300
exposure reverse nyloflex® FAC Digital
50-150 50-200 50-200 50-200 80-200 80-200 80-200 n.a. 80-300
Main exhibition (min) nyloflex® FAC
7 – 16 7 – 16 7 – 16 8 – 20 8 – 20 8 – 20 8 – 20 8 – 20 8 – 20
Main exhibition (min) nyloflex® FAC Digital
8 – 12 10 – 14 10 – 14 10 – 14 10 – 14 10 – 14 10 – 14 n.a. 10 – 14
Elution rate, mm / min
130-150 110-130 80-110 60-100 60-90 50-90 50-90 50-90 50-90
Drying time at 60 ° C | 140 °F (час)
2.5-3.0 2.5-3.0 2.5-3.0 3.0-3.5 3.0-3.5 3.0-3.5 3.0-3.5 3.5-4.0 3.5-4.0
Post exposure to UV-A (minutes)
10 10 10 10 10 10 10 10 10
Illuminated finisher UV-C (min)
10-15 10-15 10-15 10-15 10-15 10-15 10-15 10-15 10-15

1. Available only analog plates.
2. Standard thicknesses currently available - subject to change.
3. All forms of manufacturing parameters depend on the type of equipment, the service life of lamps and washout solution. All these parameters were obtained under optimal conditions, the equipment and using nyloflex® washout solution nylosolv®. Time principal exposure for digital plates was determined at a light intensity> 15mW / cm2. Under other conditions, process parameters may vary, so the above data can be used only as a guideline.



Equipment Plates nyloflex® FAC can be processed on equipment nyloflex® or other specially designated for this purpose equipment. Engraving Digital nyloflex® FAC Digital plates can be done on any laser systems intended for the production of flexo forms.
Printing inks Suitable for all paints and water-based alcohol. (ethyl acetate content below 15%, ketones least 5%)
washout solutions Particularly good results can be obtained using a washout solution nylosolv®. nylosolv® can be distilled and reused.
Information on the manufacturing process A more detailed description of the manufacturing process forms, as well as more detailed information on the parameters of processing and storage, can be found in nyloflex® Manual.
High quality standards nyloflex® printing plates are produced in accordance with the requirements to DIN ISO 9001 and DIN ISO 14001, which guarantees our customers high quality products and services.

This technical information is provided free of charge and is based on data, which FlintGroup as credible. The information is intended for specialists and can be used at their discretion. The use of this information means that all those using it will satisfy themselves that their particular conditions of use present no health and safety. Since such conditions can not be controlled, the company FlintGroup does not give any guarantee and does not assume any responsibility regarding the use of this information. This information can not be used as a license or as a recommendation to infringe any patents.